Sunday 28 October 2012

Desert Bases for 6mm

Bases and base dressing is as important for 6mm or micro armour miniatures as it is for 15mm or 28mm figures. Good basing can make a well painted army look fantastic and can even make a mediocre painted model look impressive. Back in the early days of wargaming it was an often overlooked part of modelling but in recent years it has been increasingly recognised by gamers as an important element of army painting. So when I decided to buy and paint two new armies for 6mm micro armour wargames set in the Western Desert in WWII I knew I needed to get the base design right as early as possible. 

I painted my first 6mm tanks a couple of weeks ago but held off from basing them until I had made some choices about design. The idea being that whatever base design I settled upon would be the standard that I would use for the whole army whether I painted models for it now or in a years time. I want a consistent look across my armies even if I continue to build and paint for them for many years to come. First off I made up a batch of mixed sand and modelling gravel with roughly 2 parts sand to one part gravel (Woodland Scenic's medium Tallus).

Once I had created my basing gravel I added it to several bases so I could experiment with a range of base colours and highlights until I had found the 'right' shades. Below are some examples of the different combinations I tried.

Test A

Base - 822 Middlestone 

Mid Tone - 821 German Camo Beige
Highlight - 918 Ivory
Test B

Base - 822 Middlestone 

Mid Tone - 821 German Camo Beige
Highlight - 918 Ivory
Wash - GW Devlan Mud
Test C
Base - 822 Middlestone 
Mid Tone - 821 German Camo Beige
Highlight - 918 Ivory
Wash - W&N Peat Brown
Test D (i, ii, iii, iv)
Base - 921 English Uniform
Mid Tone - 912 Tan Yellow
Highlight -
i 847 Dark Sand (Upper L)
ii 918 Ivory - St Drybrush (Upper R)
iii 918 Ivory - Lt Drybrush (Bottom L)
iv 918 Ivory - Lt Drybrush+Wash (Bot R)
Test E
Base - 983 Flat Earth
Mid Tone - 882 Middlestone
Highlight - 819 Iraqi Sand 
Test F
Base - 983 Flat Earth
Mid Tone - 912 Tan Yellow
Highlight - 819 Iraqi Sand

In the end I went with Test Diii (Base - 921 English Uniform, Mid Tone - 912 Tan Yellow, Highlight - 918 Ivory) but to be absolutely sure I then painted up a set of bases to check the consistency of my method and the finished look on a whole set of bases. I have made these with a flat area on one edge so I can add a label. 



I appreciate my choice of colours may not be to everyone's taste but it looks right to me. I wanted something light but with some depth of colour and variation in texture that would represent the rocky and barren ground of the Western Desert. So long as I am consistent with this pallet in future I think it will look really good across the two armies I will be painting. 

Now I will go and fix my first batch of tanks to their new bases. I still have a little more work to do - all the bases will need to be labelled and I will then varnish and add Dullcoat to protect the paintwork - but hopefully I can put some pictures up soon. 

9 comments:

  1. My first choice would have been A or F, but Diii was a close runner-up. It's definitely a good idea to do some test bases first to check how they work.

    ReplyDelete
  2. I preferred B but nice work all the same mate!

    ReplyDelete
  3. The pictures are a little deceptive because the one I chose looks a lot lighter 'in the flesh'. Test A looks good but was just way too light, especially when viewed from a few feet away.

    ReplyDelete
  4. Looks very similar to mine, using Wilko paints - Coffee followed by Narcissus (no pun intended) it is probably just a touch more yellow, but that's my preference - it's also a lot cheaper then Vallejo

    ReplyDelete
    Replies
    1. Will, I second the use of simple household emulsion for bases - it works a treat and is a nice change from Vallejo!

      Delete
    2. I use Wilko paints for my bases - and Coffee is the standard base colour.

      Delete
  5. I think that the smaller scale figures need more attention to thier bases than larger scales. (not to go overboard of course) So I fully understand the process you have been through.

    ReplyDelete
  6. Lee, I think you've made a great choice. I did this a few years ago when I was doing a Renaissance army - I really enjoyed making the test bases. A great blog post - sometimes the simplest things are just great fun.

    ReplyDelete

Thank you for leaving a comment. I always try to reply as soon as I can, so why not pop back later and continue the conversation. In the meantime, keep rolling high!