Wednesday 19 August 2020

Ploughed Field Terrain

Over the years I have made a lot of custom terrain and repeatedly return to the need for fields and crops for use in different periods and scales. Last year I made some small fields using thin MDF and brown plumbers caulk. They looked quite good but I have since found that their small size, and rigid nature, makes using them difficult, especially on my small table. I started toying with the idea of making some larger, more flexible fields a long time ago, but I have finally got round to making some ploughed fields using brown corduroy fabric as my base material. 

The fabric I bought came on a 1.5m wide roll so a 1m offcut gave me enough material to make 20 reasonably large fields for my games, more than enough to cover my modest games table, but also suitable for bigger games at Reject HQ. 



Once cut to size the fields were given a simple three-step makeover to finish them:

  • Although the material was called chocolate brown it had a bit of a purple undertone to it so I sprayed all the fields using Amy Painter Leather Brown. 
  • When this dried I gave the ridges a very light drybrush of sandstone from a tester pot of household emulsion paint. This has to be done sparingly, just enough to highlight the ridges. Try not to be too even with this, it looks better if some areas are lighter than others because real ground is rarely even and monotone when you look at it. Slight depressions will look darker than better-drained lumps and bumps. 
  • Then I added a few turf patches to some of the ridges. This looks a bit like grass growing in patches on the untended field. I used a large flat brush to apply the PVA to the ridges, using a very light drybrush-like stroke to get the PVA only on the ridges. The turf I then scattered on only adhered lightly and, after shaking, only a little bit remained glued in place. The result looks like sparse weeds growing in areas of deeper soil, or where the drainage is better. 
Additional details could be added, like patches of flowers or actual plants, but I wanted these to be simple. The only 'special effect I went for was one field where I added a hint of a crop ring in the field. 



I need to thank fellow Reject, Ray (Don't Throw a One) who helped with the colour and suggested the weeds which make these look so much better. Cheers, ol' fella! 



8 comments:

  1. Nice one Lee, they do look pretty good. Now all we need is a game with them?

    ReplyDelete
    Replies
    1. Fair enough...we're always nagging you to run games and you've now put on two stonking good'uns. I'll put my thinkin' cap on.

      Delete
  2. Excellent work Lee. Did you scratch build the Bocage or did you buy?

    ReplyDelete
    Replies
    1. I made that myself. There are two batches here, so there are some small differences, but I now have enough to cover my modest sized table. I wrote a couple of tutorial posts on how I did them here Making Bocage and here More Boccage

      Delete
  3. Lovely job Lee, they really look the business.

    ReplyDelete
    Replies
    1. Simple to make, cheap, flexible and they don't take up a lot of space. Wish I'd made some years ago!

      Delete
  4. Thanks for this as I will be making similar terrain features in the near future.

    Cheers, Ross

    ReplyDelete
    Replies
    1. Its worth keeping an eye out for cheep off-cut's of fabric. The stuff I got was reduced in price because it was from company that sell part rolls.

      Delete

Thank you for leaving a comment. I always try to reply as soon as I can, so why not pop back later and continue the conversation. In the meantime, keep rolling high!